Call US 1-800-569-8411

Thor 3P

by Marmot
Thor 3P
SKU: Marmot-2729


Thor 3P

Mountaineering 3-person shelter

With plenty of space for a third (or for extra gear) and with an indestructible design, the Thor three-person has become a go-to tent for expeditions and lengthy stays in the alpine realm.

$ 539.00
$659.00 Save 18%
+ Free ground shipping!

Thor 3P Specifications
Weight Minimum 9 lbs 10 oz (4.4 kg)
Weight Maximum 10 lbs 12 oz (4.9 kg)
Floor Area 47 sq ft (4.4 sq m)
Vestibule Area 12 sq ft (1.1 sq m)
Peak Height 45" (114 cm)
Packed Size 7" × 25" (17.8 × 63.5 cm)
Tent Fly Material 40d 100% Nylon Ripstop Silicon/PU 1800mm W/R, F/R
Tent Floor Material
70d 100% Nylon 5000mm W/R, F/R
Tent Canopy
40d 100% Nylon Ripstop, F/R
Number/Type of poles 6 / DAC NSL 9mm
Marmot Thor 3P
Marmot Thor 3P Marmot Thor 3P
5'11" model standing next to the Marmot Thor 3P. The Thor 3P is a symmetrical from front to back and side to side. The rear of the tent looks just like the front. 5'11 model inside the Thor 3P with front door closed and fabric half panel zipped open revealing mesh screen half panel on door. The rear door has the same feature.
Marmot Thor 3P Marmot Thor 3P
Side view of the Thor 3P. The Thor 3P uses 5 poles for set up of the inner tent, two cross poles and three poles that go from side to side making this a very strong shelter. The opposite side is the same set up as shown above. The top mesh vent with zippered fabric panel can be seen at the apex of the tent. There is a matching vent on the opposite side of the tent as well. Inside view of one of the two top vents with fabric panel zipped open and tied back. The mesh panel also has a small zippered area at the top (zip closed in photo) to adjust outer fly vent when fly is in place.
Marmot Thor 3P Marmot Thor 3P
5'11" model sitting in the middle of the Thor 3P with both front and back doors fully opened. Thor 3P with 3 standard 20" × 72" sleeping pads inside. Pad ends are up against rear entry wall which leaves over 12" of space at the top of the pads.
Marmot Thor 3P Marmot Thor 3P
View of the side mesh pockets on the interior of the Thor 3P. The same pocket configuration is on the opposite side of the interior of the shelter. View of the top mesh pocket of the ceiling interior, above the rear door. There is only this single mesh ceiling pocket on the Thor 3P interior.
Marmot Thor 3P Marmot Thor 3P
The Thor 3P requires a sixth pole for the rainfly vestibule area. The vestibule also features a small window. Side view of the Thor 3P with rainfly. The opposite side of the tent is identical to side shown above.
Marmot Thor 3P Marmot Thor 3P
View of the front poled vestibule left door opened. The right vestibule door opens in the same manner and both doors feature 2-way zippers. Close up of one the top fly vents opened with models hand sticking through. The fly vent is accessed from inner tent top vent and propped open with adjustable velcro rod located on fly. There is an identical fly vent on opposite side of the shelter as well.
Marmot Thor 3P Marmot Thor 3P
View from inside the Thor 3P at the front large poled vestibule with a size 12 shoes. The rear of the Thor 3P has a fly staked door with small vestibule space to accommodate possibly a single pair of shoes. Left side of the door opened in image above. Right side door opens and ties back in the same manner
Thor 3P Features
Marmot Thor 3P
  • DAC NSL Dual Diameter Green Poles
  • Marmot Knees System
  • Poled Vestibule - For Spacious Storage
  • Field Repair Kit - Extra Fabric to Fix Rips or Tears, Pole Repair Sleeve, Fly Buckle Back Up
  • Catenary Cut Floor - Fully Waterproof Floor with Taped Seams Lifted Off the Ground
  • Internal Guy System - Dramatically Increases the Strength of the Tent in Gale-Force Winds
  • Jingle-Free Nylon Zipper Pulls - Promote Undisturbed Sleep
  • Knees Pole System - The Ability to Increase Internal Space Without Adding Weight
  • Light-Reflective Points - To Find Your Tent At Night
  • Optional Footprint - Extra Protection Under Your Tent or for Bare Bones Setup
  • Pole Sleeve - Clip Combo
  • Snag-Free Zipper Flap - Zip and Un-Zip Without Getting the Zipper Caught
  • Two Doors - No Need to Crawl Over Your Tent Mate
  • Unique Pole Structure - For Increased Stability and Increased Internal Space
  • Welded Velcro® Attachments - Welded Velcro Attachments
  • Window Weld™ - Waterproof Window Construction Reduces Weight and Enhances Appearance