Call US 1-800-569-8411


by Black Diamond
SKU: Bibler-810122

Black Diamond

Bibler Tempest

Mountaineering, single-wall 2 person shelter

With plenty of room for two, the Tempest's shape maximizes living space by uniting steep walls with a simple floor design. In fact, it stands nearly four feet tall (1.1 m) at the peak. Equipped with two attached vestibules, you'll enjoy a floor area of 44 square feet (including vestibules). This extra space is not at the expense of strength. Four poles bend naturally into the eaves of the tent and are locked into place with Twistlock Pole Ties, providing a strong, secure framework. Both vestibules are seam-taped and corner pockets are RF welded for maximum water protection.

$ 419.00
$559.95 Save 25%
+ Free ground shipping!

Out of stock
Bibler Tempest Specifications
Min Weight 6 lbs 4 oz (2.84 kg)
Packed Weight 7 lbs 3 oz (3.26 kg)
Interior Area 32.25 sq ft (3 sq m)
Vestibule Area 12 + 2 sq ft (1.1 + 0.19 sq m)
Material ToddTex single-wall fabric
Packed Size 7" × 19" (18 × 48 cm)
Black Diamond Bibler Tempest
Black Diamond Bibler Tempest Black Diamond Bibler Tempest
Side view of the Tempest. The front and rear attached vestibules can be seen in gray in photo above. View of the rear door and vestibule of the Tempest.
Black Diamond Bibler Tempest Black Diamond Bibler Tempest
Front vestibule with door closed. There are three large vents at the top of the vestibule. Front vestibule door opened seeing through to open back vestibule door.
Bibler Tempest Features
  • 2-person, 2 doors, 2 built-in vestibules
  • Weatherproof vents at the top of each vestibule
  • 4 internal aluminum poles for maximum strength
  • 4 interior mesh pockets
  • ToddTex single-wall fabric
  • Optional ground cloth available
ToddTex Fabric
ToddTex is a polytetrafluoroethylene (PTFE) film, a thin film of stretched Teflon, laminated to a ripstop outer fabric and a fuzzy polyester inner fabric. Outer layer is a 30-denier high tenacity nylon ripstop woven in a symmetric 132 x 132 count pattern with UV resistant and DWR finish. Inner layer is a fuzzy Nexus lining that wicks water as fast as a paper towel. This action disperses moisture across the interior of the tent for rapid evaporation through the PTFE membrane.