Mad House 2
Big Agnes Mad House 2 :
additional photos with rainfly
|
|
|
The rainfly of the Mad House 2 attaches to the main tent body with color coded buckles for easy setup. The vestibules are supported by a single pole running over the peak of the tent which is anchored to a webbing strap attached to the bottom of the tent and an internal guyline attachment to the vestibule. |
Photo above shows a detailed view
of the guy line attachment to the vestibule from the inner tent. The
Mad House 2 uses a solid connection point fromt the guy line attachment
to the support pole for the vestibule to avoid stressing the rainfly
fabric. |
|
|
||
The photo above shows a three quarter view of the Mad House 2 with the vestibule door closed. Both vestibule doors feature a clear window at the top of the door. |
The photo above shows a side view of the
Mad House 2 with a 5'4" model entering the tent through the open front
vestibule door. |
|
The photo above shows a three quarter view of the Mad House 2 with the hooded vent open to provide ventilation at both sides of the tent. | The hooded vents at the sides of the Mad House 2 van be accessed through a zippered opening in the main tent body. The photo above shows the vent bein propped open by model from inside the tent. | |
The photo above was taken from inside the tent body of the Mad House 2 looking out into one of the two vestibules with the vestibule door closed. A pair of size 8 shoes are shown for scale. | The Mad House 2 uses a pole sleeve design for the two poles that support the inner tent. The sleeves feature openings between the pole and tent body to allow air to circulate when the rainfly is in use. |