- Kerlon 1200 outer tent fabric and 9mm poles make for a very lightweight yet supremely stable tent.
- All season construction: outer tent walls extend to the ground and mesh areas are backed with adjustable fabric panels.
- Tunnel construction offers maximum space to weight ratio and is the ideal choice for mobile journeys.
- A good amount of room for three occupants and their gear.
- Linked but seperable inner and outer tent for simultaneous pitching.
- Tunnel design requires only four pegs for pitching, and the simple, single opening continouse sleeve and pole tensioner system is quick to pitch and remarkably stable.
- A single entrance and extended vestibule afford easy access and maximum storage space, but keep the weight very low.
- The lower portion of the rear outer wall can be rolled up for greater venting options.
- The inner tent can be replaced with a Mesh Inner tent (sold separately)
- The outer and inner tents can be used separately. Pitching the inner tent alone requires optional pole holderes
The pictures below are of the prior version of the Hilleberg Nallo 3 GT. Click images for more.
View of the Hilleberg Nallo 3 GT tent. The Hilleberg Nallo is an exoskeleton tent that is set up with the poles in the outer tent (fly). The inner tent is attached to the fly on the inside. The Nallo 2 GT & 4 GT are set up in the same manner and look identical to image shown.
Photo shows the Hilleberg Nallo 2 or Nallo 2 GT inner tent with two standard size Therm-a-Rest sleeping pads placed inside the tent. The inner tents of the Nallo GT versions are the same as the standard Nallo version inner tents. The inner tent of the Nallo tents can be set up without the outer tent, as shown at left, with optional pole holders.
The Hilleberg Nallo and Nallo GT tents feature a zippered vent at the rear of the tent that can be partially or fully opened to provide increased ventilation. Vent is closed in image at left.
The Hilleberg Nallo & Nallo GT inner tents can be set up separately to be used in warmer conditions. Four pole holders (sold separately) and an additional guy line are required to set up the inner tent without the outer tent. The two support poles are run through the elastic suspension loops that usually attach the inner tent to the outer tent, and toggles at the corners of the floor secure the pole holders to the inner tent.