Kerlon 1800 - 40D Ripstop Nylon,
coated on both sides w/ 3-Layers of 100% Silicone
Inner Tent Fabric
40D Ripstop Nylon w/DWR
Floor Fabric
100D Nylon w/triple-coated PU
Poles (10mm)
4 × 144.9" (3 × 368 cm)
Pegs
22 Y-Pegs
"Min. Weight" refers to the outer and inner tents and the
poles only.
"Packed Weight" includes all items that come with the tent
The photos below are of the prior version of the Keron
4GT. The
difference between the older version below and the current version are that
the current version now has 10 mm poles, Redesigned vestibule, Spectra-blend
guy lines and Reflectors
The Hilleberg Keron 4 GT is pictured
at left with a 5'11" model. The Keron 4 GT is an exoskeleton tent that
is set up with the 4 poles in the outer tent (fly).The inner tent is
attached to the fly on the inside. Tent is pictured at left in this full
set-up, with the inner tent and fly set up as one unit. The vestibule
door features a solid fabric door and inner removable mesh panel (shown
closed in photo at left) which provides ventilation while helping to
keep bugs out.
For additional photos of
the Hilleberg Keron 4 GT full setup, click
here.
The outer tent of the Hilleberg Keron 4 GT
can be set-up with or without the inner tent. The photo at left was
taken from inside the front vestibule looking through the inner tent
into the rear vestibule. Both doors of the inner tent are fully open
in the photo.
For additional photos of
the Hilleberg Keron 4 GT interior, click
here.
The inner tent can be set up separately to
be used in warmer conditions. To set up the inner tent of the Hilleberg
Keron 4 GT separately, you need six pole holders (sold separately) and
two guy lines to keep the inner tent erect. The poles are run through
the elastic suspension loops that usually attach the inner tent to the
outer tent. The photo at left shows 4 standard size Therm-a-Rest sleeping
pads inside the tent for scale.
For additional photos of
the Hilleberg Keron 4 GT inner
tent, click
here.
