The Mountain Hardwear Ultralamina 32° includes
a compression sack for the bag. The gallon jug pictured in photo
contains an amount of water which is equivalent to the weight of the
bag and compression sack (the jug is filled to 2" deep).
This photo of Mountain Hardwear Ultralamina
32° is shown with both of the side zippers fully open. This
mummy style bag features two side zippers and Thermic Micro insulation
for durability and ease of care.
The dual pull
zippers can be partially opened from the bottom to provide ventilation
to the mid section of the Mountain Hardwear Ultralamina 32°. The user
could use these openings (shown by green arrows)
to put their arms through to perform tasks while inside the sleeping
bag.
The Mountain Hardwear Ultralamina 32° uses two
double sided Snag Free zippers. Insulation filled
draft tubes (green arrow) run inside the
zippers to keep cold out.
The photo above shows a close view of the Mountain
Hardwear Ultralamina 32° ergonomic hood with the face opening fully open.
The drawcord adjuster shown by green arrow is fully loosened.
The face opening of the Mountain Hardwear Ultralamina
32° can be cinched down by adjusting a dual drawcord tensioner (green arrow)
to allow only a small ventilation opening.
The Mountain Hardwear Ultralamina 32° features
azippered external pocket on the left side of the bag near the face opening.
This pocket can be used to store small items such as a flashlight within
easy reach.
UltraLamina 32° Specifications
Size:
Regular
Long
Weight:
1.9 lbs (870 g)
2.1 lbs (950 g)
Stuffed Size:
6.5" x 12"
(17 x 30 cm)
6.5" x 12"
(17 x 30 cm)
Insulation:
Thermic Micro
Fill Weight:
18 oz (510 g)
21 oz (600 g)
Shell Fabric:
20 D Micro Ripstop Nylon
Loft:
3.1" (8 cm)
3.1" (8 cm)
Inside Length:
78" (198 cm)
84" (213 cm)
Shoulder Girth:
62" (157 cm)
64" (163 cm)
Hip Girth:
58" (147 cm)
60" (322 cm)
Foot Girth:
38" (97 cm)
40" (102 cm)
Product Features
Performance mummy cut is snug, reducing girth, weight, and bulk
and maximizing thermal efficiency
Patent pending, welded Lamina™ construction
enhances loft and eliminates cold spots
Ultralight shell is soft and highly wind resistant
Thermic Micro™ fill
is soft, lofty, compressible and durable
Dual #5 zippers minimize weight and provide ventilation options
Comfort
Footbox follows natural foot position for maximum warmth and comfort
Face gasket and tailored hood comfortably block drafts at the hood
opening and seal in warmth
