*includes filter housing w/cleanside cover and ceramic gauge,
ceramic filter cartridge, intake hose with standard pre-filter and inlet
float,
scrubbing pad, carrying bag, instructions.
MSR MiniWorks EX Additional Photos
The photo above shows the the A.
ceramic element,
B. ceramic gauge, C. scrub pad and D. the
cleanside cover. When output of filter becomes slowed, scrub pad can be
used to abrade ceramic element to unclog dirtied element. When ceramic
gauge fits around element, the element should be replaced. The ceramic
gauge stores on the Clean-Side Cover as in the photo at right.
In the image above, the green arrow points
to the output nipple of the filter where an output hose can be attached
(output hose is not provided). The blue arrow shows the threads where
an MSR dromedary bag or a Nalgene brand water bottle can be attached for
direct filtering. Also pictured is the Clean-Side Cover which screws onto
bottom of filter to keep outlet contaminant-free.
MSR MiniWorks EX Features
Ceramic element. Unlike other filter media, only ceramic
elements can be abraded and renewed in the field time and time again
for easy field maintenance. The ceramic cream-colored portion of the
filter at left eliminates Protozoa, bacteria, algae, silt, and fungi.
Carbon core. The black internal Carbon core removes
unpleasant tastes and odors caused by organic compounds, such as iodine,
chlorine, and pesticides.
Field-maintainable: Can be cleaned repeatedly for
full filter recovery with no tools required.
Fast Flow: AirSpring Accumulator™ increases
filtration speed; up to 1-liter per minute.
MSR MiniWorks EX Details
AirSpring Accumulator increases filtration speed and flow
Ergonomic design for pumping efficiency
Threaded fitting securely interfaces with MSR hydration products
or Nalgene bottles.
End-of-life ceramic gauge lets you know when to replace ceramic element
Intake hose with pre-filter and inlet
float. 48" long, 0.25" inner diameter
