Features
- Kerlon 1000 outer tent fabric and 9mm poles make for a supremely lightweight tent that is still quite strong.
- 3 season construction: outer tent walls do not extend to the ground and mesh areas have no backing fabric panels.
- Tunnel construction offers maximum space to weight ratio and is the ideal choice for mobile journeys.
- Linked but seperable inner and outer tent for simultaneous pitching.
- Tunnel design requires only four pegs for pitching, and the lightweight pole system combines 9 mm poles with Lock Tip ball ends, open ended pole sleeves, and an innovative grommeted webbing tab with an adjustable tensioner.
- A single entrance and vestibule afford easy access and plenty of storage space, but keep the weight very low.
- The inner tent can be replaced with a Mesh Inner tent (sold separately)
- The outer and inner tents can be used separately. Pitching the inner tent alone requires moving the detachable pole holders from the outer to the inner tent.
Images below are of previous version of the Anjan 3.
5'11" model next to Anjan 3
Rear view of the Anjan 3. There is no door on the rear but the entire rear wall can be rolled up revealing large inner tent mesh vent. See very bottom picture of left column.
Front view of the Anjan 3 with one side of vestibule door open and tied back. The door can be opened from the front or side and can be rolled up in a variety of ways to regulate airflow.
Front vestibule detached and rolled back revealing the inner tent. Inner tent door is nearly all mesh, providing excellent venting. The large rear window vent of the inner tent can also be see in image above. (Anjan 2 shown above )
>5'11" model sitting in the middle of the Anjan 3. The Anjan 3 has a front inner tent height of 40" and a rear inner tent height of 32.5".
Three standard 20" × 72" sleeping pads inside the Anjan 3. Pads are postioned with the top edge of the pads against the front wall where the door is located. There is a bout 4"-5" of space between the ends of the pads and the rear back wall where the large mesh vent window is. The viewers right most pad does overlap the pad in the middle slightly.
One of the two mesh pockets in the interior of the Anjan 3.
Vestibule area of the Anjan 3 with a sized 12 pair of shoes.
The Anjan 3 features a grommeted webbing tab that connects to outer tent and inner tent by way of hoop and toggles. The black toggle is connected to the outer tent and the red toggle connects to the inner tent. The tab can be used with the inner tent and poles to set up the inner tent by itself.
The inner tent of the Anjan 3 can be removed partly (as shown above) or completely to protect inner tent from dirt or mud when cooking or hiding out from the rain temporarily.
View of the entire rear wall rolled up exposing the inner tent's large mesh vent for added air flow on hot days.
Inner tent of the Anjan 3 set up by itself. The inner tent is set up using the included two poles and four grommeted webbing tabs.
Video
Tech Specs
| Minimum Weight*: | 1.8 kg/4 lbs |
|---|---|
| Packed Weight*: | 2.0 kg/4 lbs 7 oz |
| Outer tent fabric: | Kerlon 1000 |
| Poles (9 mm): | 1 x 328, 1 x 285 cm / 1 x 129.1, 1 x 112.2 in |
| Pegs: | 12 Tri-Peg |
