The Adjust-A-Cant waistbelt adjustment allows the user
to change the waist belt angle to fit. The Gregory Denali Pro features
a thermoformed, segmented hipbelt with rigid plastic reinforcement
wing to help transfer weight to the hips evenly.
|
|
Side view of the Gregory Denali Pro shows the rigid wing
support (indicated by the green arrows) to which the padded hipbelt is
attached. This
reinforced frame attaches to the Adjust-A-Cant panel behind the lumbar
pad. |
| The Auto-Cant shoulder harness automatically adjusts to
fit the user, and provides two strap position options for torso adjustment.
In the photo above, the lower position slots are indicated by green arrows,
and the unused upper position slots are shown by the red arrows.
The sternum strap is held in place between a layer of hook and loop fastener
(held apart by hand in photo above) which runs the length of the contoured
shoulder straps. Load lifter straps at the top of the shoulder straps
help adjust the position of the Gregory Denali Pro relative to the user. |
|
The photo above shows a detailed view of the Auto-Cant
rigid wing support. This system allows the user to adjust the
angle of the hipbelt to one of three positions. This is achieved
by removing the two brass bolts (indicated by the red arrows), rotating
the rigid wing around the pivot point (yellow arrow), and then replacing
the bolts through one of the other 2 hole set options (shown by green
arrows). In photo above, pack is viewed from the backpanel with
the waistbelt padding removed. |
