Vehicle outlet cable, multi-linking cable,
battery clamp
cable and power inverter
Brunton Solo 15 & Solo 7.5
Image above shows the Brunton Solo 15. The blue arrow points to the input. Charging may be performed with the Brunton Solaris,
Solar Roll, Solar Flat & the
included wall transformer, or vehicle DC cigarette lighter attachment.
All charge sources connect to the same Charge Input Barrel Jack in the
power pack’s
front panel. The green arrow points to the charge status of the Solo 15.
The red arrow points to the DC output for a barrel jack connector. The
DC output can be connected to the AC power inverter shown below.
Image above shows the Brunton Solo 7.5. The colored
arrows point to the same feautres as described in the Solo 15 pictured
at left.
Image above shows the included Power Inverter.
This converter connects to the output of the Solo 15 and 7.5 (with included
cords) which enables charging of USB charging cords such as those used
for phones, mp3 players, digital cameras, etc. (USB cord not included.)
Image above shows the included output cords. From
left to right, multi-linking cable, battery clamp cable and vehicle outlet
cable. There are also cords included for charging the Solo units not shown
above, these include a wall trasformer for connecting to a standard household
110-volt AC outlet, a Vehicle DC cable for connecting to a standard 12-volt
DC power outlet and a power converter cable for use when using include
power converter.
