Description
The Firebee AR Parka delivers outstanding warmth and weather protection for minimal weight. Insulated with 850-fill goose down, the 3D Down Contour Construction’s bi-directional internal volume pleats conform to the body to maintain maximum loft as you move. The fully taped GORE® THERMIUM™ shell is specifically selected for windproof, water resistant, highly breathable protection, and the insulated helmet-compatible insulated StormHood™ provides coverage without impacting vision.
Features
- Windproof
- Breathable
- Great warmth-to-weight ratio
- Compressible and packable
- Water resistant
- Packs to about half the volume of the Ceres SV Parka
- Fully seam taped to improve water resistance
- Down filled volume pleat constructed liner is independent of outer shell for increased insulation
- Helmet compatible StormHood™
- Adjustable hood drawcords
- Cohaesive™ hood adjustments for ease of use with mittens or gloves
- WaterTight™ Vislon front zip
- Elastacized sleeve cuffs
- Dual lower hem adjusters
- Internal zippered pocket
- One internal dump pocket
- Two insulated hand pockets with WaterTight™ zippers
- Note: Arc'teryx WaterTight™ zippers are highly water resistant, but not waterproof. We do not recommend keeping items in your pockets that may be damaged by moisture
- Stuff sack included
Tech Specs
| Weight: | 680g / 1lb 8oz |
|---|---|
| Fit: | Regular Fit, Centre back length: 79.4 cm / 31.25 in |
| Fabrics: |
|
Sizingmens
| X-Small | |||
| Chest: | 36 in | 94 cm | |
|---|---|---|---|
| Waist: | 29 in | 74 cm | |
| Hip: | 36 in | 91 cm | |
| Sleeve: | 32 in | 81 cm | |
| Small | |||
| Chest: | 38 in | 97 cm | |
| Waist: | 31 in | 79 cm | |
| Hip: | 38 in | 97 cm | |
| Sleeve: | 33 in | 84 cm | |
| Medium | |||
| Chest: | 40 in | 102 cm | |
| Waist: | 33 in | 84 cm | |
| Hip: | 40 in | 102 cm | |
| Sleeve: | 34 in | 86 cm | |
| Large | |||
| Chest: | 43 in | 109 cm | |
| Waist: | 36 in | 91 cm | |
| Hip: | 43 in | 109 cm | |
| Sleeve: | 35 in | 89 cm | |
| X-Large | |||
| Chest: | 46 in | 117 cm | |
| Waist: | 39 in | 99 cm | |
| Hip: | 46 in | 117 cm | |
| Sleeve: | 36 in | 91 cm | |
Arc'teryx - Men's Fit Guide.
Next to Skin Fit
These snugly-fitting garments are made with stretch fabrics to fit next to the skin to enhance moisture management and thermal efficiency. Used for base layers which integrate well with Expedition, Trim, Athletic and Relaxed Fit.
Trim Fit
These trim fitting garments share motion-friendly traits with Arc'teryx Regular fit, but are patterned with lower volume for reduced bulk. Arc'teryx trim fit is sized for a base layer and a trim synthetic or down filled mid-layer
Regular Fit
"Arc'teryx Standard" fit, the complex patterns used utilize anatomical shaping and gussets to enhance motion and eliminate excess bulk. Trimmer than the Relaxed fit with room for a base layer, a light fleece mid-layer and a synthetic or down filled mid-layer.
Relaxed Fit
Relaxed fit garments rely on both articulation and higher volume patterns to provide comfort and mobility. Arc'teryx looser fit featuring room for a base layer plus a thick cold weather mid-layer
Expedition Fit
Expedition fit is suitable for winter / extreme conditions. The larger cut accommodates multiple layers without binding or restricting movement. Arc'teryx maximum fit with room for a base layer plus multiple, thick cold weather mid-layers.
Ergonomic 3-Dimensional Patterning
Ergonomic 3-Dimensional (e3D) patterning brings an additional level of articulation to provide enhanced range-of-motion in Arc'teryx Trim, Athletic and Expedition fit categories. The application of e3D patterning allows for enhanced mobility for sport-specific activities in challenging environments.
